View Cart  |  Sitemap
Home Home > News > GS submersible slurry pump structure

Tel.: +86-311-8502 6467

Fax: +86-311-8305 0889


GS submersible slurry pump structure

The whole machine is dry submersible slurry pump, and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so that high pressure water and impurities and are effectively prevented from entering inner cavity of the motor.


1.Besides the main impeller, there is the agitation impeller which can agitate the 

sludge deposited on the water bottom into turbulent flow and pump the sludge out.


2.The trans-flux parts such as the impeller and the agitation impeller are made 

from high-hardness high chromium cast steel, have wear resistance, corrosion resistance and strong drainage capacity, and allow big solid particles to pass.


3. The motor is submerged in water, is not limited by suction stroke, and has high 

sludge suction rateand thorough desilting.


4.The integral device is simplified, needs no auxiliary stirrer device or ejector 

device, and has simple and convenient operation and low total investment of the unit.


5.The agitation impeller directly approaches the depositional surface, and controls the concentration through submerged depth. Under the condition of large medium proportion, an auxiliary device can be arranged to increase the concentration of the medium.

Warman pumps are most popular slurry pumps in the world, and there are so many competitors come into the market. High quality slurry pump spare parts can be supplied

>>Previous: what is the slurry pump´╝č

>>Next: Installation and disassembly of mechanical seals

We love to hear about you and are happy to answer any questions!

Your E-mail: *
Your Name: *
Your Country:
Contact Tel:
Detailed Message :

Home | Products | Project | About Us | Service | News | Contact Us

Tel.: +86-311-8502 6467Fax: +86-311-8305 0889 E-mail:

Copyright © Shijiazhuang Gravel Slurry Pump Industry Co., Ltd. All Rights Reserved.Technical Support: Reanod