What are the precautions in the initial installation of the slurry pump

Slurry pump in when first installed correctly or not will not only influence after the operation, even exist some risk factors, therefore, grasps the precautions in the initial installation of the slurry pump is very necessary below, Shijiazhuang Gravel Slurry Pump Industry Co.,ltd.to you briefly explain about the slurry pump in the initial installation of the matters needing attention.

1) must ensure that the pump steering direction is consistent with the arrow on the bracket. Motor test switch must be completely disengaged and the pump is prohibited, the motor drives the pump shaft to rotate in the reverse direction,otherwise it will cause damage to parts.

2) using slurry pump oil lubrication, oil should be marked on the pump before opening the oil gas line. Non oil driving, otherwise, the bearing will be burnt out.

3) with packing seal of the pump, must be required to add packing before driving.

4) slurry pumps with mechanical seal, seal water supply must be guaranteed. Running water is prohibited, otherwise the mechanical seal will be burned.

Our Slurry Pumps contain MH, ZJ, ZGB series slurry pump which also belong to abrasive slurry pump, you can choose without any doubt.