Size:4inch to 16 inch
Capacity:36m3/h to 4320m3/h
Head:5m to 80m
Materials:High chrome alloy,Nature Rubber and Polyurethane
MG Dredge Pump Introduction:
MG Dredge pump are designed to handle very large particles for gravel and dredging operations. MG Gravel pumps are designed for the continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump.
MG Dredge Pump Features:
MG dredge pumps are constructed of a single casing connected by means of clamps and a widened suction port.
IMPELLERS – pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination – optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes
NPSH - exceptional NPSHr conditions due to large impeller eyes
LARGE PARTICLES - large eye openings and vane passages allow for the largest particle flows of any MG pump
SEALS– MG gravel pump offers a wide variety of seal options to suit any process requirements
EXPELLER (CENTRIFUGAL SEAL) – available with low flow water flush or zero flow (grease lubricated) options to provide exceptional sealing where water introduction to the seal is intolerable or limited
STUFFING BOX – gland sealing with packing and lantern ring
LOW-FLOW SEAL – MG gravel pump offers a variety of low-flow seals, which can significantly reduce water usage in the stuffing box – the low-flow seal systems can be applied in a variety of applications using several material and component options
BEARING ASSEMBLY – all bearings assembled with highest quality tapered roller bearings in controlled environments to prevent lubricant and housing contamination – oversized shaft diameters and reduced overhang in the wet end contribute to long life and reliability in the field
BASE – a single piece base with integrated adjustment mechanism for impeller clearance within pump – bearing assembly locks into base using four heavy-duty bolts – three custom designed mounting modes available: overhead using integrated single pedestal system, side-by-side with adjustable motor mount, and direct-coupled with precision in-house alignment (optional VFD packages available)
MG Dredge Pump Structural Drawing:
MG Dredge Pump Performance Chart:
MG Dredge Pump Performance Data Sheet:
Model | Motor P(KW) | Capacity Q(m³/h) | Head H(m) | Speed n(r/min) | Eff. η% | NPSH (m) | Impeller Dia. D(mm) |
MG4D | 4-60 | 36-250 | 5-52 | 600-1400 | 58 | 2-5.5 | 378 |
MG6E | 15-120 | 126-576 | 6-45 | 600-1400 | 60 | 3-4.5 | 391 |
MG8S | 30-560 | 216-936 | 8-52 | 500-1000 | 65 | 3-7.5 | 533 |
GG8S | 45-560 | 180-1100 | 24-80 | 500-950 | 72 | 2.5-5 | 711 |
MG8F | 15-560 | 216-936 | 8-52 | 400-800 | 65 | 3-7.5 | 533 |
MG10F | 600 | 360-1440 | 10-60 | 350-700 | 65 | 1.5-4.5 | 667 |
MG10G | 600 | 360-1440 | 8-60 | 400-800 | 65 | 1.5-4.5 | 667 |
GG10G | 600 | 360-1580 | 16-80 | 350-700 | 73 | 2-10 | 950 |
MG12G | 600 | 576-2808 | 14-45 | 300-700 | 68 | 2-8 | 864 |
MG14G | 1200 | 720-3600 | 18-45 | 300-500 | 70 | 3-9 | 1016 |
MG16G | 1200 | 720-4320 | 12-48 | 250-500 | 72 | 3-6 | 1067 |
MG Dredge Component Diagram:
MG Dredge Pump Application:
▶Heavy Mining
▶Explosive Sludge In Metal Smelting
▶River And Pond Dredging
▶Sand Excavation
▶Coal Washery
▶Power Plant
▶Mineral Processing Plants
▶Larger Particle Or Low NPSHA Applications
We love to hear about you and are happy to answer any questions!
Home | Products | Project | About Us | Service | News | Contact Us
Tel.: +86-311-8502 6467Fax: +86-311-8305 0889 E-mail: sales@gsslurrypump.com sales1@gsslurrypump.com
Copyright © Shijiazhuang Gravel Slurry Pump Industry Co., Ltd. All Rights Reserved.Technical Support: Reanod