View Cart  |  Sitemap
+86-311-8502 6467sales@gsslurrypump.com
Home Home > Products > Clean Water Pump > MSH Split Case Pump

Tel.: +86-311-8502 6467

Fax: +86-311-8305 0889

E-mail: sales@gsslurrypump.com

MSH Split Case Pump

Size (discharge): 1 inch to 32 inch

Capacity: 3.4~ 15000 m3/hr

Head: 8.6~140m

Efficiency:Up to 92%

Materials:Cast iron,SS 304,SS 316,Bronze etc


Project Description

MSH Split Case Pump Introduction:

MSH Split Case Pump is Horizontal, Split-casing, and Double-suction centrifugal water pump. Double Volute casing is used to contract the axial force due to high head to extend the serve lift time of bearing. Because of the short distance of two bearing, the shaft is shortened to avoid much vibration.. Closed and Circulated cooling system is applied within the sealing house.The Shaft sleeve and O-ring are used to avoid any connection between the shaft and fluid.


MSH Split Case Pump Features:

Both inlet and outlet of this pump are placed under the axial line,, the pump casing is opened in the middle so it is unnecessary to remove the water inlet and outlet pipelines and motor.if repaired The pump moves CW viewing from the motor side. The pump moving CCW can also be made .


Both pump casing and cover form the working chamber of the impeller and there are threaded holes for mounting vacuum and pressure meters on the flanges ant both inlet and outlet have water draining plug on the lower side of flange.


The impeller is static-balance and dynamic balance tested, fixed by the the side nuts and the Shaft sleeve nuts and its axial position can be adjusted via the nuts and axial force will be get balanced by means of the symmetrical arrangement of its blades, there may be residual axial force which is borne by the bearing at the axial end.


This pump shaft is supported by two centripetal ball bearings, which are mounted inside of the bearing chamber on both ends of the pump and lubricated with grease. The double suction seal ring is used to reduce the leakage.


This pump is driven directly via flexible coupling.(V-belt driving will be available if required).


The shaft seal is mechanical seal or packing seal .


MSH Split Case Pump Structural drawing:


MSH Split Case pump Parameter Selection Table:


Pump model

Capacity(m3/h)

Head(m)

Speed(rpm)

Power(KW)

MSH150

112--220

35--84

2900

30--55

MSH200

160--351

31--100

2900

37--110

MSH250

324--612

8.6--65.1

1450

22--132

MSH300

504--1663

8.7--140

1450--1470

22--680

MSH350

745--1570

10--125

1450--1470

55--630

MSH400

900--1620

32--85.5

980--1480

440--500

MSH500

1150--3800

10.6--108

740--970

110--800

MSH600

2300--4000

13--80

730--970

145--730

MSH700

2111--4896

39.5--99.5

742--980

397--1252

MSHS800

3960--6878

23--84

600--750

450--1600

MSH1000

6600--9900

32--52

600

1250

MSH1200

5832--14400

6--95.7

500--745

710--3450



MSH Split Case pump On-site Application:

▶MSH split case pump is suitable for transporting pure water or liquids with physical and chemical properties to water.

▶Suitable for mine

▶Suitable for agriculture irrigation.

▶Suitable for water supply and drainage in factory.

▶Suitable for power station.

▶Suitable for urban water supply and drainage

▶Suitable for flood control.

Our factory offer rubber slurry pump, vertical slurry pump, gravel slurry pump,and clean water pump, etc.

 

Solution

We love to hear about you and are happy to answer any questions!

Your E-mail: *
Your Name: *
Your Country:
Contact Tel:
Application:
Detailed Message:
Product Name:
CAPTCHA:

Home | Products | Project | About Us | Service | News | Contact Us

Tel.: +86-311-8502 6467Fax: +86-311-8305 0889 E-mail: sales@gsslurrypump.com sales1@gsslurrypump.com

Copyright © Shijiazhuang Gravel Slurry Pump Industry Co., Ltd. All Rights Reserved.Technical Support: Reanod